Quick Answer: Warehousing in Savannah means storing, transloading and consolidating cargo within 5-20 miles of Garden City Terminal, mostly in Pooler, Port Wentworth, Rincon and Bloomingdale. Import containers get a limited number of free days at the terminal before demurrage starts, so a transload warehouse empties them in 1-2 working days.
- Savannah warehouses sit 5-20 miles from Garden City Terminal, so a drayage round trip takes 60-150 minutes door to gate.
- Transloading a 40' high cube into 53' trailers returns the box fast and kills demurrage and per-diem detention charges.
- FTZ 104 and CBP bonded warehouses let importers defer duty until goods leave the zone for US consumption.
- Our warehouse in Savannah receives, stores, packs and consolidates cargo arriving by truck or rail from Georgia, the Carolinas, Tennessee, Kentucky and Alabama.
Savannah's warehouse market exists because of one terminal and two highways. Garden City Terminal moves the containers, and I-95 and I-16 move the freight out of them.
Get a quote for your shipment
Tell us what you need to ship, and an advisor replies with your quote within a few hours.
Request a quote →What is warehousing in Savannah and why does the port drive it?
Quick Answer: Warehousing in Savannah is short- or long-term storage and handling of cargo near Garden City Terminal, the largest single container terminal in North America. The port's volume, 24/7 gates and Mason Mega Rail connection pull millions of square feet of distribution space into Chatham and Effingham counties.
Warehousing savannah covers five functions: receiving, storage, handling, fulfillment and export prep. All of it happens inside the drayage radius of port code USSAV. The warehouse is the buffer between a vessel discharge and your inland delivery schedule.
Garden City Terminal runs on around 1,300 acres with multiple deepwater container berths. The Mason Mega Rail yard adds capacity for about one million rail container lifts per year. That rail link is why Memphis and Atlanta shippers still route through Savannah instead of a closer port.
Garden City Terminal is the largest single-terminal container facility in North America. That concentration of lifts in one place is exactly why so much distribution space clusters within a 20-mile ring around it.
Which states ship through Savannah?
Savannah is the usual ocean gateway for Georgia, South Carolina, North Carolina, Tennessee, Kentucky and Alabama. How your cargo reaches the port depends on where you sit.
- Georgia — direct truck from Atlanta, Macon, Augusta or Columbus, usually a same-day or next-day line-haul down I-16 or I-75.
- South Carolina and North Carolina — truck down I-95 and I-26, typically one driving day or less to the warehouse door.
- Tennessee and Kentucky — mostly intermodal rail, interchanged through the Atlanta and Memphis gateways into Mason Mega Rail.
- Alabama — truck via I-20 and I-16, or rail for larger programs out of Birmingham.
Our warehouse in Savannah receives, stores, packs and consolidates cargo for both directions. Import freight gets devanned and distributed. Export freight gets inspected, palletized and loaded into containers. The receiving discipline is the same one we describe in Miami Warehouse Cargo Reception: How It Works — piece count, condition report, photos, then put-away.
What types of warehousing can you book in Savannah?
Quick Answer: Savannah offers five practical warehouse types: standard 3PL storage and fulfillment, CBP bonded warehousing, FTZ 104 space, cross-dock, and dedicated contract space. They differ on duty treatment, how long cargo may dwell, cost structure and the kind of handling allowed inside the four walls.
Pick the type by what you need from the cargo, not by what is cheapest per pallet. A 3pl warehouse savannah program and a bonded facility solve different problems.
Standard 3PL warehouse
Duty-paid goods, stored on racks or floor-stacked. You get pallet storage, pick and pack, kitting, labeling and e-commerce fulfillment. No customs status attaches to the goods, so handling is unrestricted. This is the right fit for most warehouse storage savannah programs feeding US distribution.
Bonded or FTZ space
Goods sit duty-unpaid under CBP control. A Class 3 bonded warehouse holds cargo up to five years with limited manipulation. FTZ 104 space allows more activity and lets re-exported cargo leave without ever paying US duty. Both require paperwork discipline.
Cross-dock and transload sit outside both buckets. Freight moves dock to dock in hours and never enters a storage billing cycle. Dedicated contract space is the opposite end: fixed square footage and fixed labor for seasonal or high-velocity programs.
Savannah warehouse types compared
| Warehouse type | Duty treatment | Dwell limit | Best use case |
|---|---|---|---|
| Standard 3PL | Duty paid before arrival | Contract only | US distribution and e-commerce fulfillment |
| CBP bonded (Class 3) | Deferred until withdrawal | Up to 5 years | Slow-moving or unsold duty-heavy inventory |
| FTZ 104 | Deferred; eliminated on re-export | Indefinite while activated | Re-export to Latin America, high-duty goods |
| Cross-dock | Already cleared | Hours to 48 hours | Transload and fast inland dispatch |
| Dedicated contract | Already cleared | Per lease term | Seasonal peaks and fixed-volume programs |
Source: CBP bonded warehouse classes (19 CFR Part 19) and FTZ Board program rules · 2026
How far are Savannah warehouses from the Port of Savannah?
Quick Answer: Most Savannah warehouses sit 4-25 miles from Garden City Terminal. Port Wentworth and Pooler are closest at 4-10 miles and 10-20 minutes. Rincon and Bloomingdale run 12-20 miles, and Effingham County parks reach 20-30 miles, still inside a same-day double-turn drayage radius.
Mileage decides how many container turns a driver finishes per shift. Two turns instead of one cuts your per-container drayage cost close to half. That single fact drives the whole Savannah submarket map.
| Submarket | Miles to Garden City | Typical drive time | Typical building size |
|---|---|---|---|
| Port Wentworth | 4-8 miles | 10-15 minutes | 100k-500k sq ft |
| Pooler | 8-12 miles | 15-20 minutes | 150k-800k sq ft |
| Rincon | 12-18 miles | 20-30 minutes | 200k-1M sq ft |
| Bloomingdale | 12-20 miles | 20-30 minutes | 250k-1M sq ft |
| Effingham County | 20-30 miles | 30-45 minutes | 500k-1.5M sq ft |
Raw mileage is not the whole story. Gate queue time, chassis splits and terminal appointment windows often cost more minutes than the drive itself. A chassis split sends the driver to a separate yard for equipment before the container pull. That alone can burn a turn.
I-95 and I-16 access decides whether inland delivery leaves the same day. A warehouse on the wrong side of a congested interchange loses the afternoon dispatch window.
Pro Tip
Ask your 3PL for its average terminal turn time in minutes, not its distance in miles. A Rincon facility with a street-turn agreement and early appointments often beats a Port Wentworth site with none.
West Coast shippers know this math differently. Drayage radius in the Inland Empire runs 50-70 miles from the San Pedro Bay ports, which is why dwell economics there look nothing like Savannah's — we break that down in Warehousing Los Angeles: The Complete 3PL Guide. Compare both before you build a dual-coast network.
What is transloading at the Port of Savannah and why do importers use it?
Quick Answer: Transloading is unloading an ocean container at a nearby warehouse and reloading the freight into 53' domestic trailers or onto pallets. Importers use it to return the box inside free time, cut per-diem detention, and move more cargo per domestic trip than a 40' container allows.
Devanning (also called destuffing) means fully emptying the container. Cross-docking means moving freight from inbound dock to outbound dock without a storage cycle. Transloading usually combines both: devan the box, stage the freight, reload a domestic trailer the same day.
The loading math that saves money
A 53' domestic trailer holds more standard 40x48 pallets single-stacked than a 40' high cube. Roughly three 40' HC containers consolidate into two 53' trailers.
That ratio removes one inland line-haul out of every three. On a Savannah-to-Nashville or Savannah-to-Charlotte lane, transloading lowers the inland cost per unit. The longer the inland leg, the bigger the gain.
Floor-loaded cargo changes the economics. Hand-stacked cartons take hours of labor to unload and palletize. Palletized cargo devans with a forklift in under an hour. Labor hours are the real price driver, not the container size.
| Factor | Transload at Savannah warehouse | Direct-to-door drayage |
|---|---|---|
| Inland cost per unit | Lower — 3 containers into 2 trailers | Higher — one container per trip |
| Container returned | Within 1-2 working days | After delivery and unload at consignee |
| Per-diem exposure | Minimal | High on long inland legs |
| Added transit days | +1 to +2 days | None |
| Cargo handling risk | Extra touch — needs condition reports | Single seal, no rehandling |
| Best for | Multi-DC distribution, inland over 400 miles | Single consignee near the port |
Transloading also buys you inspection time. You can sort by SKU, re-label, run a QC check and reject damaged cartons before paying inland freight on them. Shipping damaged goods 700 miles and returning them costs far more than a dock-level inspection.
Pro Tip
Request a photo condition report at the moment the seal is cut. If cargo is wet or crushed inside the box, that photo is the evidence your cargo insurance claim needs. Once freight is on a domestic trailer, proving ocean-leg damage gets very hard.
Get a quote for your shipment
Tell us what you need to ship, and an advisor replies with your quote within a few hours.
Request a quote →How long can a container sit at Garden City Terminal before demurrage starts?
Quick Answer: Import containers at Garden City Terminal get a set number of free days after discharge before demurrage accrues, depending on the carrier and your contract. Once the box leaves the gate, the carrier's detention or per-diem clock starts, with its own free days set by the carrier. Both clocks run at the same time on a loaded container.
Three different charges get confused constantly. Learn the difference before you argue an invoice.
- Demurrage — billed by the ocean carrier, according to the FMC, while your container sits inside the terminal gates past free time.
- Detention / per diem — charged by the ocean carrier for its equipment held outside the terminal past free time.
- Storage — charged by the warehouse for cargo on its floor, billed per pallet or per square foot.
Free time is not universal. It varies by carrier, by service contract and sometimes by commodity. Each ocean carrier publishes its own tariff. Read the free days on your arrival notice — never work from memory or last year's contract.
What usually blows free time in Savannah
- Chassis shortage during vessel bunching, when four ships discharge in the same 48 hours.
- Chassis split, where the box and the chassis sit in different locations and the driver loses a turn.
- Appointment scarcity, when the terminal's slots fill before your broker releases the entry.
- Late customs clearance, because an ISF error or a CBP hold froze the release.
Warehousing protects the clock. The play is simple: pull the box as early as the release allows, devan it in one to two working days, return the empty, and store the cargo on pallets at warehouse rates. Warehouse storage is priced per pallet. Demurrage is priced per container per day, and it escalates.
Demurrage escalates in tiers
Most terminal and carrier tariffs step the daily rate up after the first few chargeable days. A container stuck for a week can generate charges larger than the entire inland line-haul you were trying to save money on. Watch the clock from the day the arrival notice lands, not from the day you plan to pull.
Is there a foreign trade zone or bonded warehouse near the Port of Savannah?
Quick Answer: Yes. Foreign-Trade Zone 104 covers the Savannah area, and CBP-approved bonded warehouses operate inside the drayage radius. Both let importers delay duty until goods enter US commerce. Goods re-exported from an FTZ never pay US duty at all, which matters for cargo bound for Latin America.
An FTZ is a secured site treated as outside CBP territory for duty purposes, even though it sits on US soil. FTZ 104 is Savannah's zone, administered under the Foreign-Trade Zones Board with CBP oversight at the operator level.
What an FTZ actually saves you
- Duty deferral — you pay when goods leave the zone for US consumption, not when the vessel discharges.
- Duty elimination on re-exports — cargo that leaves the zone for Cartagena or Kingston never pays US duty.
- Weekly entry — one entry per week instead of one per shipment, which cuts merchandise processing fee exposure.
- Inverted tariff relief — approved production can enter at the finished-good rate when it is lower than the component rate.
A CBP bonded warehouse is simpler and narrower. A Class 3 facility holds imported goods up to five years duty-unpaid. Manipulation is limited by the bond class — you can sort, repack and relabel, but you cannot manufacture.
Neither option activates overnight. A bonded warehouse needs CBP port director approval of the facility and a custodial bond (19 CFR Part 19). An FTZ site must be activated by the CBP port director; the operator certifies its own inventory control and recordkeeping system and submits a procedures manual, which CBP does not approve, and CBP may audit it (19 CFR Part 146). Plan months, not weeks.
Talk to a licensed customs broker first
Duty rates, HTS classification and FTZ eligibility are regulatory determinations. AB Group Shipping is a freight forwarder and NVOCC, not a customs broker or legal counsel. Confirm your entry strategy with a licensed broker before you commit inventory to a zone.
The re-export angle is the one most LatAm traders miss. Hold inventory in bonded or FTZ space, then consolidate it into LCL shipments bound for Cartagena, Caucedo, Kingston or Puerto Cortés. You skip US duty entirely and still serve multiple Caribbean buyers from one US stock position.
How much does warehousing cost in Savannah, Georgia?
Quick Answer: Savannah warehousing is priced on four lines, not one: storage per pallet or per square foot per month, inbound handling (receiving and devanning), outbound handling (pick, pack, load), and accessorials. Volume, dwell time, pallet height and whether cargo is floor-loaded move the number most.
Never accept a single "per pallet" number. It hides the lines that actually bill you. A real warehouse storage savannah rate card has four blocks.
The four cost blocks
- Storage — per pallet position per month, or per square foot per month for dedicated space. Pallet height and whether you can double-stack change the rate.
- Inbound handling — receiving per pallet, or container devanning per container. Floor-loaded boxes cost materially more than palletized ones.
- Outbound handling — pick fee per order, pack fee per line, pallet build, trailer loading.
- Accessorials — shrink wrap, labeling, pallet exchange, after-hours receiving, hazmat handling.
The minimums nobody mentions in the first call
Ask three questions before you compare quotes. Is there a monthly storage minimum? Is there a minimum pallet charge per inbound? And how is storage billed — calendar month, 15-day cycles, or anniversary date from receipt?
Anniversary billing surprises importers most. A pallet received on the 28th can trigger a full second month on the 28th of the next month. Over a season that doubles a storage line you never forecast.
Storage, inbound handling, outbound handling and accessorials. A quote missing any of these is incomplete, and the gap always shows up on the first invoice.
Accessorials that catch people out: long-term dwell escalators after 90 or 120 days, peak season surge rates, overweight pallet fees, and after-hours receiving. The 2026 peak-season fulfillment readiness guidance makes the same point: lock surge terms before Q4, not during it.
What a 3PL needs before it can quote you
- Commodity description and whether it needs food-grade, hazmat or temperature control
- Pallet count per month inbound, and average dwell days
- Order volume and average lines per order
- Container type and whether cargo arrives palletized or floor-loaded
- Any certification your buyer requires — C-TPAT, FDA registration, AIB
Pricing moves with all five inputs. Use the calculator on this page to price your exact volume and lane instead of working from a generic market average.
Get a quote for your shipment
Tell us what you need to ship, and an advisor replies with your quote within a few hours.
Request a quote →How does export prep and consolidation work from a Savannah warehouse?
Quick Answer: An export warehouse in Savannah receives your freight, inspects and palletizes it, builds export-grade packaging, then consolidates it into an LCL shipment or loads a full container for the vessel cut-off. The cargo is booked, documented and delivered to Garden City Terminal before the port's cut-off, not the vessel ETD.
An export warehouse savannah operation runs on a fixed sequence. Skip a step and you miss a sailing.
- Receive the inbound truck or rail shipment, count pieces and photograph condition.
- Inspect and palletize, building stable, strapped pallets sized for container doors.
- Crate where needed, using ISPM-15 compliant wood, heat-treated or methyl bromide fumigated, for solid-wood packaging when the destination country requires it, as most do.
- Consolidate into an LCL booking, or stage for full container loading.
- Load and seal the container with a loading plan and recorded seal number.
- Drayage to Garden City Terminal ahead of the cargo cut-off.
- Release the Bill of Lading once the booking and documents are confirmed.
Inbound lanes feed this from across the Southeast. Truck from Georgia, South Carolina, North Carolina and Alabama. Rail or line-haul truck from Tennessee and Kentucky. The same receiving workflow our team runs in Florida applies here — see Miami Warehouse Cargo Reception: How It Works for the step-by-step version.
Which documents does the export warehouse prepare or collect?
- Commercial invoice — Factura Comercial for Spanish-speaking destinations
- Packing list with piece count, gross and net weight, and dimensions
- Certificate of Origin — Certificado de Origen, often required for preferential duty
- HS codes at six digits minimum, matched to the destination tariff
- Consignee tax ID: RUT or NIT for Colombia, RUC for Peru, RFC for Mexico
Cut-off is not ETD
The documentation cut-off usually falls before the cargo cut-off, and both land days before vessel ETD. Plan your warehouse load date against the cargo cut-off, never the sailing date. Missing a Friday cut-off by two hours means a full week's delay, not a few hours.
Which Incoterm decides who pays for warehousing at destination?
The Incoterm you agree sets who carries the destination warehouse bill. Under EXW, FOB or CIF, who pays destination handling, drayage, storage and duty depends on the Incoterm and the wording of your contract, so spell it out in writing before the cargo ships.
DAP and DDP move delivery further toward the buyer's door; confirm in the contract which party clears import customs and pays duty. Taking on import-side charges looks generous on a quote and exposes the seller to foreign customs liability and surprise storage bills it cannot control.
Practical advice: name the exact warehouse address in the contract when using DAP, not just the city. "DAP Savannah" and "DAP Rincon, Georgia" are 18 miles and one extra drayage invoice apart.
What value-added services does an export warehouse handle?
Beyond storage, a fulfillment warehouse savannah operation adds the handling that protects cargo on a 10-18 day ocean leg.
- Pick and pack, kitting, re-labeling, barcode and country-of-origin marking
- Export crating, corner protection, moisture barrier film and desiccant bags for ocean transit
- Photo documentation and written condition reports before the doors close
- Shipper-load-and-count container stuffing with a loading plan and recorded seal number
That last one matters for claims. A documented loading plan plus seal number ties your cargo to the container in a way a bare packing list never will.
How do you choose a 3PL warehouse in Savannah?
Quick Answer: Judge a Savannah 3PL on five things: miles to Garden City Terminal, dock door and yard capacity, WMS with EDI or API visibility, certifications your commodity requires, and cargo insurance limits. Ask for peak-season surge capacity in writing before you sign, not in October.
The physical checklist
- Distance and average turn time to Garden City Terminal
- Dock doors per 100,000 sq ft — fewer than eight signals a loading bottleneck
- Trailer parking spaces and secure yard capacity for drop-and-hook
- Racked versus floor-stack capacity, and clear height for double-stacking
- Shift pattern — single shift, two shifts, or 24/7 operation
The technology checklist
A warehouse without real-time inventory visibility will cost you more in phone calls than it saves in rate. Confirm the WMS supports EDI 940/945 or a REST API, lot and serial tracking, and a published cycle-count accuracy target. Ask what their inventory accuracy ran last quarter. A real operator answers with a number.
Certifications and insurance
Verify what your commodity actually needs: C-TPAT, FDA facility registration, food-grade and AIB audit scores, cGMP, or hazmat capability. Then ask the hard question. Warehouse legal liability is not cargo insurance. Legal liability typically caps at a low figure per pound and only pays on proven negligence. Carry your own cargo policy.
| Port market | Typical drayage radius | Rail access | Space availability |
|---|---|---|---|
| Savannah, GA | 4-30 miles | Mason Mega Rail, dual Class I | Large modern inventory |
| Charleston, SC | 5-30 miles | Near-dock rail | Moderate, tighter land |
| Jacksonville, FL | 5-25 miles | Dual Class I | Good, strong Caribbean lanes |
| Norfolk, VA | 5-35 miles | Heavy on-dock rail | Moderate |
Georgia's broader 3PL landscape, including Atlanta's inland distribution ring, is mapped well in this 3PL Georgia fulfillment and distribution guide. If your network also touches the Northeast, compare the New Jersey 3PL market and the West Coast picture in Warehousing Los Angeles: The Complete 3PL Guide before committing to a single coast.
Negotiate peak season in Q2
Vessel bunching and gate congestion hit Savannah hardest in peak season. Get overflow space, surge labor rates and a written contingency plan into the contract while capacity is still loose. Calling in October means paying spot rates for whatever is left.
Get a quote for your shipment
Tell us what you need to ship, and an advisor replies with your quote within a few hours.
Request a quote →Warehousing savannah works best when the warehouse, the drayage and the ocean booking sit with one team. With thousands of shipments processed across the USA–Latin America corridor, we coordinate receiving, consolidation and sailing cut-offs as one timeline. Our warehouse in Savannah receives, stores, packs and consolidates cargo arriving by truck or rail from Georgia, the Carolinas, Tennessee, Kentucky and Alabama. Use the calculator on this page to price your storage and shipping together — no email required, no follow-up calls.
Savannah warehousing is billed on several lines: storage per pallet or square foot per month, inbound handling or container devanning, outbound pick and pack, plus accessorials such as shrink wrap, labeling and after-hours receiving. Your rate depends on pallet count, dwell days, order volume and whether the container arrives floor-loaded. Use the calculator on this page to price your exact volume and lane.
Most warehouses sit 4 to 25 miles from Garden City Terminal. Port Wentworth and Pooler are the closest at roughly 4-10 miles and 10-20 minutes by truck, while Rincon, Bloomingdale and Effingham County run 12-30 miles. A tight radius lets a drayage driver complete two container turns per day instead of one.
Transloading means unloading an ocean container at a warehouse near the port and reloading the freight into 53' domestic trailers or onto pallets. Importers use it to return the container inside free time and avoid demurrage and per-diem detention. It also moves more cargo per domestic trip, since a 53' trailer holds more pallets than a 40' high cube.
Yes. Foreign-Trade Zone 104 serves the Savannah area, and CBP-approved bonded warehouses operate within the port's drayage radius. Both options defer duty until the goods enter US commerce, and cargo re-exported from an FTZ never pays US duty. Confirm eligibility and entry procedure with a licensed customs broker before you commit inventory.
A 3PL warehouse stores and fulfills goods that have already cleared customs, with no restriction on handling or dwell time beyond your contract. A bonded warehouse operates under a CBP bond, holds goods duty-unpaid for up to five years, and limits what manipulation is allowed inside. Choose bonded or FTZ space when you want to delay duty or plan to re-export.
Import containers receive a set number of free days after discharge before demurrage accrues at Garden City Terminal. Once the box leaves the gate, the carrier's detention or per-diem clock starts, with its own free days. Free time varies by carrier and contract, so check the arrival notice for your specific booking.
Sources
We checked the rules and figures in this guide against these sources on November 15, 2026.
- International Trade Administration (Foreign-Trade Zones Board): About FTZs · 2025-05-22
- eCFR / Office of the Federal Register: eCFR :: 19 CFR 19.1 -- Classes of customs warehouses.
- International Trade Administration (trade.gov) / FTZ Board: The U.S. Foreign-Trade Zones Program: Information for CBP
- Office of the Federal Register / eCFR: eCFR :: 19 CFR Part 144 -- Warehouse and Rewarehouse Entries and Withdrawals
- Federal Register (Foreign-Trade Zones Board): Reorganization of Foreign-Trade Zone 104 (Expansion of Service Area) Under Alternative Site Framework; Savannah, Georgia · 2020-08-18
- Office of the Federal Register / eCFR: eCFR :: 19 CFR Part 146 -- Foreign Trade Zones
- USDA Animal and Plant Health Inspection Service: Export ISPM 15-Compliant Wood Packaging Material From the United States to Another Country · 2026-01-25
- Alcaldía Mayor de Bogotá – Secretaría Jurídica Distrital (Régimen Legal de Bogotá): Registro Único Tributario - RUT
- International Trade Administration, U.S. Department of Commerce: Colombia - Import Requirements and Documentation · 2026-03-09
- Federal Maritime Commission: Detention and Demurrage
✓ Fact-checked by AB Group Shipping on November 15, 2026. Prices come from our own rate system. How we check our guides · Spotted an error? [email protected]